Search Area :

 
 

 

Upcoming Events

JanFebruary 2012Mar
MonTueWedThuFriSatSun
303112345
6789101112
13141516171819
20212223242526
2728291234
567891011
 
Equipments

Speedball Tools

 
 

Any Speedball type of playing must be played using the FISB official standards of the following:


 

1 - The Racket:

  1. A regulation racket authorized by International Federation of Speedball (FISB) must be used.
  2. The racket is made of rigid plastic. The hitting surface is flat and perforated.
  3. The racket should not measure over 40.5 cm in length and 24.5 cm in width. The face should not measure over 26.0 cm in length and 24.0 cm in width.
  4. The racket should not have any damaged part at the top of both sides.
Fig.1 shows how the racket looks like.
Fig.1
 

2 - The Ball:

  1. A regulation ball authorized by International Federation of Speedball (FISB) must be used.
  2. The ball is hollow, elliptical in shape and made of rubber.
  3. It should be 65 mm ± 2 mm in diameter and be 40 grams (+/_2gm) in weight without the nylon thread.
  4. It is fixed to one end of a cord 2mm (+/- 0.2mm) thick and 1.50 m long (150cm).
  5. The other end of the cord is attached to a ring, which is set at the spool on the top of the pole.
Fig.2 shows how the ball looks like.
Fig.2
 

3 - The Stand:


The distance between the highest point of the assembled apparatus from the ground (base, pole and pulley) is 175 cm. (+/- 2cm).

A. The Pole:
A metallic pole with 1.7 m high and diameter of 3cm (+/- 0.5cm)

B. The pulley (spool):
  • Made of metal or plastic
  • Measures 5 cm (+/- 0.5cm) length.
  • Diameter of 3.5 cm at its wide head and base.
  • Length of narrow shaft: 2.5 cm.
  • Diameter of 1.4 (+/_ 0.2cm) at its narrow shaft
The Pulley
   
The Stand
C. The Base:
  1. Made of metal and cement or pure metal.
  2. The pole must be fixed to a disc-shaped base or similar weighted base that weighs no less than 50 kilograms.
  3. The base should be 60 cm diameter and its height should be related to the pole so as the total height of the assembled apparatus (base, pulley and base) should be 175(+/- 2cm)cm from the ground.
Fig.3 shows how the base looks like.
Fig.3
 

4 - The Court:

  1. The super solo and the solo relay court should not be less than 4x4 meters.
  2. The court for the single matches should be at least 6x6 meters divided by a neutral zone of 60 cm width.
  3. The court for the doubles should be at least 6x8 meters divided by a neutral zone of 60 cm width.
Fig.4 shows how the Court looks like.
Fig.4
 
 
 
 
 
Copyright © 2011 FISB, All rights reserved - Site Designed & Developed By NetSignature